Brocade Communications Systems FESX624HF Installation Manual page 19

TABLE 2 LEDs for FastIron X Series ports (Continued)
LED Position
10/100/1000 Fiber Port LEDs
Lnk Bottom left
Act Bottom right
100/1000 Fiber Port LEDs on the FESX424HF, FESX624HF, and FESX624HFE-PREM6
Left for upper copper
Right for lower copper connector
10-Gbps
Port LEDs
Lnk Top right for left-most connector
Top left for right-most connector
Act Bottom right for left-most
connector
Bottom left for right-most
connector
POE Port LEDs
POE Left for upper port
Right for lower port
Port regions
Ports on the FastIron compact switches are grouped into regions. For a few features, such as port monitoring and unknown unicast
configurations, you will need to know the region to which a port belongs. However, for most features, a port's region does not affect
configuration or operation of the feature. If a port's region does affect configuration or operation of a feature, it is noted and described in
the appropriate feature section of this guide.
FastIron X Series compact switches with 24 ports:
•
Ports 1 – 12
•
Ports 13 – 24
•
Port 25 (optional 10-GbE uplink port)
•
Port 26 (optional 10-GbE uplink port)
FastIron X Series compact switches with 48 ports:
•
Ports 1 – 12
Brocade FastIron Edge X-Series Hardware Installation Guide
Part Number: 53-1002499-02
State Meaning
On The fiber port is connected.
Off No fiber port connection exists.
On or blinking Traffic is being transmitted and received
on the fiber port.
Off No traffic is being transmitted on the fiber
port.
On The link is up.
Off The link is down.
Blinking The port is transmitting or receiving traffic
On The port is connected.
Off No fiber port connection exists.
On or Blinking Traffic is being transmitted and received
on the fiber port.
Off No traffic is being transmitted on the fiber
port.
On (Green) The port is enabled, a power-consuming
device has been detected, and the module
is supplying power to the device.
Off The port is not providing in-line power.
Product Overview
Hardware features
19