Transferring Data Records - Siemens OP7 Equipment Manual

8.3

Transferring Data Records

Overview A transfer screen offering the following functions is available for transferring
data records.
Transfer screen
The transfer screen is called via Record
Figure 8-2
Specifying source
The data record numbers for the source data record and the destination data
and destination record must be entered in the transfer screen.
Equipment Manual OP7, OP17
Release 04/99
OP PLC
Before a changed or newly set up data record in a recipe can become
effective in the PLC, it must first be transferred via data record transfer to
the PLC.
PLC OP
Transfer the data record which is active in the PLC to the OP under a new
number and a new name.
OP OP
Copy an already existing data record on the OP.
1
Source: Dest.:
Juice
Accept
PLC: OP:
3
Transfer screen (Example: OP7)
The PLC data record is always "0" for both directions of transfer.
The OP data record must always be specified as a number > 0.
Transfer. It is shown below.
2
1 No. of the source data
record
2 No. of the destination data
record
3 Only with SIMATIC S5:
The recipe/data record active
in the PLC
4 Recipe number selected on
the OP
4
8-7