Siemens OP7 Equipment Manual page 39

2 Apply input
Left-aligned input Inputs in alphanumeric fields begin at the left edge, i.e. they are left-aligned.
Each time you enter a character, the cursor is moved one position to the right.
If the maximum possible number of characters is exceeded, the OP over-
writes the last character with each additional input.
Correcting input
If you have made a mistake when entering characters in a field, the following
options are available for making corrections before you apply the input.
Character in-
correct
Equipment Manual OP7, OP17
Release 04/99
Step Keys
ENTER
or
cancel
ESC
input
Incorrect
input
Switch to the alphanumeric key as-
signment. The Shift LED comes on.
Move the cursor to the incorrect cha-
racter.
Enter A...F or characters from the ex- Enter A...F or characters from the ex
tended character set
or
switch to the numeric key assignment
(the Shift LED goes out) and enter a
digit.
Description
The input becomes valid.
The keypad switches back from the
alphanumeric to the numeric key
assignment.
The input cursor is deleted.
The keypad switches back from the
alphanumeric to the numeric key
assignment.
The "old" input becomes valid
again.
Remedy
SHIFT
SHIFT
Using keys
,
3-9