Branching In Standard Screens - Siemens OP7 Equipment Manual

4.3

Branching in Standard Screens

Branching to
With
screen level
can control and monitor the process by means of suitable screens and stan-
dard screens and perform system settings.
With reference to the standard screens, a description is provided below of the
procedure for branching between individual screens within the screen hierar-
chy.
Branching using Call in your configured screen hierarchy the tandard basic screen. Its name
soft keys
is displayed on the first line. Depending on the OP version and the number of
lines to be configured (OP17), the next lines include a different number of
text elements of the current entry. These text elements show the name of
other standard screens to which you can branch by using the assigned soft
keys.
Using the soft keys beneath the symbols << and >>, you can move the dis-
played screen segment of the current screen. You branch to the next screen by
pressing the soft key beneath the appropriate text indicating the name of the
screen to be called.
Figure 4-3 shows the branch principle on a configured 8-line display (in this
instance, the OP17). figure 4-4 shows the branch principle of the 4-line dis-
play of the OP7.
Figure 4-3
Equipment Manual OP7, OP17
Release 04/99
ENTER
you change from message level to screen level. At this point you
Basic screen OP17
Events Alarms Screens
StatVAR ForceVAR
F1 F2 F3 F4
Branching at Screen Level (for an OP17, 8x40
Records
System Password
F5 F6 F7 F8
representation
)
4-5