Selecting Screens - Siemens OP7 Equipment Manual

5.2

Selecting Screens

Methods of Screens can be viewed on the OP and serviced (edited) and printed. Before
selecting screens
this is possible, they have to be selected. A screen can readily be selected by
means of
Selecting with
With soft keys, you can branch from one screen to another. The branch is
soft key defined in the configuration.
Selecting with The configured assignment of the function keys, unlike the soft keys, is valid
function key
globally. In this way the screen that was permanently defined during configu-
ration can be selected in any operating situation.
Selecting with
screen directory
Selecting with PLC To implement operator guidance, a screen can be selected from the PLC by
job
means of a PLC job. In this instance, the cursor is already positioned in a
specified entry or in an input field, in which the operator can perform his
input.
Equipment Manual OP7, OP17
Release 04/99
soft key,
function key,
directory,
PLC job.
Step Procedure
1 Depending on the action you
want to take, call on of the two
standard screens
Screens Edit or
Screens Print.
2 Select a screen
3 Confirm selection
Result
The screen directory is shown.
It contains only screens which
were included in the directory
during configuration –
for example:
09 Fill level
14 Parameter_A
15 Parameter_B
17 Report
Depending on the standard
ENTER
screen called in step 1, the
screen you select is
displayed or
printed.
5-3