Deleting Alarm And Event Messages Via Standard Screens - Siemens OP7 Equipment Manual

7.4.2

Deleting alarm and event messages via standard screens

Procedure Standard screens can be used to delete
To delete event and alarm messages, proceed as follows:
7.4.3 Automatically Deleting the System Message Buffer upon Buffer
Overflow
Procedure If the system message buffer is completely full, the oldest message is deleted
automatically from the buffer when another system message occurs. There is
no overflow warning or forced printout of the deleted message, in the case of
event and alarm messages.
Equipment Manual OP7, OP17
Release 04/99
all (not individual) acknowledged and departed alarm messages
all (not individual) arrived and departed event messages.
Step
1 Depending on the type of message you want to delete, choose
one of two standard screens
Alarms Delete for alarm messages or
Events Delete for event messages.
2 Press
to delete buffer,
ENTER
to not delete buffer.
ESC
Procedure
7-13