Siemens OP7 Equipment Manual page 81

As long as you have not confirmed an input value, you can terminate editing
with ESC. The old value is then displayed again.
Storing a changed To save a changed data record as a new data record, do not overwrite the
data record as a
called data record when exiting the input screen. Instead, enter a new data
new data record record number and, if necessary, a new data record name before saving the
data record.
Proceed as follows:
The next time you call the data record directory, you will find the new data
record listed under the new data record number.
Equipment Manual OP7, OP17
Release 04/99
Step
1 Position cursor in the field for the data record number.
Enter the number, and confirm.
2 Position cursor in the field for the data record name.
Enter the name, and confirm.
The data record name may not exceed 12 characters.
Procedure
8-5