Siemens OP7 Equipment Manual page 85

Using the transfer
Proceed as follows to transfer a data record.
screen
Equipment Manual OP7, OP17
Release 04/99
Step
1 Select the standard screen Record
2 Select the recipe in the recipe directory
3 Position the cursor on the Source field in the transfer screen.
Depending on the direction of transfer desired, enter the
appropriate source number (see examples), and confirm.
4 Position the cursor on the Destination field.
Depending on the direction of transfer desired, enter the
appropriate destination number (see examples), and confirm.
5 Position the cursor on the Accept field, and confirm transfer.
During the data transfer, an asterisk ("*") is indicated in the
acceptance field.
6 Exit the standard screen with
Procedure
Transfer.
ESC
8-9