HP A8800 Installation Manual page 32

Turn on the power switch on the router.
2.
Before the router is powered on, the following information is displayed:
DDR2 SDRAM test successful.
System is starting...
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing..........................
Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Compiled Date
CPU Type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTEND CPLD Version : 001F
PCB Version
The router initiates the POST and the results are displayed at the console terminal.
Board self testing...........................
Board steady testing...
Board SlotNo...
Subcard exist testing...
DX246 testing...
PHY88E1111 testing...
CPLD1 testing...
CPLD2 testing...
NS16550 register testing...
The device's Mac address...
CF Card testing...
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
When the POST is complete, the router boots the applications. The following information appears on
the terminal screen (only a portion is shown in this example):
Starting to get the main application file--cfa0:/A8800.BIN!..
The main application file is self-decompressing.............................
System application is starting...
HP A8800 BootWare, Version 1.10
: Apr 22 2011
: MPC8548E
: 32KB
: 512KB
: 1000MHz
: DDR2 SDRAM
: 1024MB
: 400MHz
: 4MB
: 128MB
: 247MB
: 1024KB
: 001F
: Ver.B
27
[ PASS ]
[ 0 ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[00:23:89:D4:00:00]
[ PASS ]
*
*
*