Replacing A Fan Tray For An A8808 - HP A8800 Installation Manual

Gently insert the new fan tray into the fan tray slot along the slide rails until it has close contact
3.
with the backplane.
Use a Phillips screwdriver to fasten the captive screws on both sides of the fan tray panel.
4.
Figure 37 Removing a fan tray for an A8805/A8812

Replacing a fan tray for an A8808

The fan tray for an A8808 is installed horizontally.
To replace a fan tray for an A8808:
Use your thumb to press the fan tray button, and then pull the fan tray partway out.
1.
Holding both sides of the fan tray, pull out the fan tray along the slide rails. Put the removed fan
2.
tray on an antistatic mat or into its original shipping materials.
Insert a new fan tray into the fan tray slot along the slide rails until it has close contact with the
3.
backplane.
55