Verifying The Installation; Powering On The Router; Startup Process - HP MSR93X Installation Manual

Hide thumbs Also See for MSR93X:
Table of Contents

Advertisement

Figure 30 Connecting the power adapter

Verifying the installation

After you complete the installation, verify that:
There is enough space around the router for heat dissipation.
The router is mounted securely on the wall or on a sturdy workbench.
Antennas, USB devices, and interface modules are installed correctly.
The router and power module are grounded correctly.
The power supply meets requirements.
The router is connected correctly to the console terminal and other devices; parameters are
configured correctly on the console terminal.
Before starting up the router, set up the console terminal as described in
cable and setting terminal
for the router.

Powering on the router

WARNING!
Before powering on the router, locate the power source switch so that you can cut off power promptly
in case of an emergency.
Switch on the power source.
Turn on the power switch on the router.

Startup process

After power-on, the router initializes its memory, and then runs the extended BootWare. The console
terminal screen displays the following information:
System is starting...
Do you want to check SDRAM? [Y/N]
Booting Normal Extend BootWare
parameters." Then, power on the router and perform initial configuration
24
"Connecting the console

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents