HP A8800 Installation Manual page 47

Table 18 Command output
Field
Transceiver diagnostic
information
Current diagnostic
parameters
Temp.(°C)
Voltage(V)
Bias(mA)
RX power(dBM)
TX power(dBM)
Description
Fault detection information of the transceiver module plugged in the interface
Current fault detection parameters
Digital diagnosis parameter-temperature, in °C, with the precision to 1°C
Fault detection parameter-voltage, in V, with the precision to 0.01 V
Fault detection parameter-bias current, in mA, with the precision to 0.01 mA
Fault detection parameter-RX power, in dBM, with the precision to 0.01 dBM.
Fault detection parameter-TX power, in dBM, with the precision to 0.01 dBM
42