Show Startup-Config Arp - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show startup-config arp

To display the Address Resolution Protocol (ARP) configuration in the startup configuration, use the
show startup-config arp command.
Syntax Description all
Command Default
None
Command Modes Any command mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display the ARP startup configuration:
switch# show startup-config arp
!Command: show running-config arp
!Time: Mon Aug 23 07:33:15 2010
version 5.2(1)N1(1)
ip arp timeout 2100
ip arp event-history errors size medium
interface Vlan10
ip arp 10.193.131.37 00C0.4F00.0000
switch#
Related Commands Command
copy running-config
startup-config
ip arp event-history
errors
ip arp timeout
ip arp inspection
show running-config
arp
OL-27883-02
show startup-config arp [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Description
Copies the running configuration to the startup configuration file.
Logs ARP debug events into the event history buffer.
Configures an ARP timeout.
Displays general information about DHCP snooping.
Displays the ARP running configuration.
Cisco Nexus 5500 Series NX-OS Security Command Reference
show startup-config arp
327