Cisco Nexus 5500 Series Command Reference Manual page 251

Chapter R Commands
This example shows how to add rules to a user role with privilege 0:
switch(config)# role name priv-0
switch(config-role)# rule 1 deny command clear users
switch(config-role)#
This example shows how to remove a rule from a user role:
switch(config)# role MyRole
switch(config-role)# no rule 10
Related Commands Command
role name
show role
OL-27883-02
Description
Creates or specifies a user role name and enters user role configuration
mode.
Displays the user roles.
Cisco Nexus 5500 Series NX-OS Security Command Reference
rule
237