Chapter
Show Commands
show mac access-lists
To display all Media Access Control (MAC) access control lists (ACLs) or a specific MAC ACL, use the
show mac access-lists command.
Syntax Description
access-list-name
Command Default
The switch shows all MAC ACLs unless you use the access-list-name argument to specify an ACL.
Command Modes
EXEC mode
Command History
Release
5.2(1)N1(1)
Examples
This example shows how to display all MAC ACLs on the switch:
switch# show mac access-lists
MAC access list acl-mac
MAC access list test
switch#
Related Commands
Command
mac access-list
show access-lists
show ip access-lists
OL-27883-02
show mac access-lists [access-list-name]
(Optional) Name of a MAC ACL, which can be up to 64 alphanumeric,
case-sensitive characters.
Modification
This command was introduced.
10 permit any any
statistics per-entry
10 deny 0000.1111.2222 0000.0000.0000 0000.1111.3333 ffff.0000.0000
Description
Configures a MAC ACL.
Displays all ACLs or a specific ACL.
Displays all IPv4 ACLs or a specific IPv4 ACL.
Cisco Nexus 5500 Series NX-OS Security Command Reference
show mac access-lists
297