Radius-Server Timeout - Cisco Nexus 5500 Series Command Reference Manual

radius-server timeout

radius-server timeout
To specify the time between retransmissions to the RADIUS servers, use the radius-server timeout
command. To revert to the default, use the no form of this command.
Syntax Description
seconds
Command Default
1 second
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Examples This example shows how to configure the timeout interval:
switch(config)# radius-server timeout 30
This example shows how to revert to the default interval:
switch(config)# no radius-server timeout 30
Related Commands Command
show radius-server
Cisco Nexus 5500 Series NX-OS Security Command Reference
226
radius-server timeout seconds
no radius-server timeout seconds
Number of seconds between retransmissions to the RADIUS server. The
range is from 1 to 60 seconds.
Modification
This command was introduced.
Description
Displays RADIUS server information.
Chapter R Commands
OL-27883-02