Permit Vsan - Cisco Nexus 5500 Series Command Reference Manual

Chapter P Commands

permit vsan

To permit access to a VSAN policy for a user role, use the permit vsan command. To revert to the default
VSAN policy configuration for a user role, use the no form of this command.
Syntax Description
vsan-list
Command Default None
Command Modes User role configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines This command is enabled only after you deny a VSAN policy by using the vsan policy deny command.
Examples
This example shows how to permit access to a VSAN policy for a user role:
switch(config)# role name MyRole
switch(config-role)# vsan policy deny
switch(config-role-vsan)# permit vsan 10, 12, 100-104
switch(config-role-vsan)#
Related Commands Command
vsan policy deny
role name
show role
OL-27883-02
permit vsan vsan-list
no permit vsan vsan-list
Range of VSANs accessible to a user role. The range is from 1 to 4093.
You can separate the range using the following separators:
•
•
Modification
This command was introduced.
Description
Denies access to a VSAN policy for a user.
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
, is a multirange separator; for example, 1-5, 10, 12, 100-201.
- is a range separator; for example, 101-201.
Cisco Nexus 5500 Series NX-OS Security Command Reference
permit vsan
217