Show Running-Config Dhcp - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show running-config dhcp

To display the Dynamic Host Configuration Protocol (DHCP) snooping configuration in the running
configuration, use the show running-config dhcp command.
Syntax Description all
Command Default
None
Command Modes Any command mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
To use this command, you must enable the DHCP snooping feature using the feature dhcp command.
Examples This example shows how to display the DHCP snooping configuration:
switch# show running-config dhcp
!Command: show running-config dhcp
!Time: Mon Aug 23 09:09:11 2010
version 5.2(1)N1(1)
feature dhcp
ip dhcp snooping
ip dhcp snooping information option
service dhcp
ip dhcp relay
ip dhcp relay information option
ip arp inspection filter arp-acl-01 vlan 15,37-48
switch#
This example shows how to display the DHCP snooping configuration with the default information:
switch# show running-config dhcp all
!Command: show running-config dhcp all
!Time: Mon Aug 23 09:10:11 2010
version 5.2(1)N1(1)
feature dhcp
ip dhcp snooping
OL-27883-02
show running-config dhcp [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Cisco Nexus 5500 Series NX-OS Security Command Reference
show running-config dhcp
317