Vsan Policy Deny - Cisco Nexus 5500 Series Command Reference Manual

Chapter V Commands

vsan policy deny

To configure the deny access to a VSAN policy for a user role, use the vsan policy deny command. To
revert to the default VSAN policy configuration for a user role, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default None
Command Modes User role configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines To permit access to the VSAN policy, use the permit vsan command.
Examples This example shows how to deny access to a VSAN policy for a user role:
switch(config)# role name MyRole
switch(config-role)# vsan policy deny
switch(config-role-vsan)#
This example shows how to revert to the default VSAN policy configuration for a user role:
switch(config)# role name MyRole
switch(config-role)# vsan policy deny
switch(config-role-vsan)# no vsan policy deny
switch(config-role)#
Related Commands Command
permit vsan
role name
show role
OL-27883-02
vsan policy deny
no vsan policy deny
Modification
This command was introduced.
Description
Configures permit access to a VSAN policy for a user.
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
Cisco Nexus 5500 Series NX-OS Security Command Reference
vsan policy deny
363