Feature Http-Server - Cisco Nexus 5500 Series Command Reference Manual

Chapter F Commands

feature http-server

To enable HTTP or Hypertext Transfer Protocol Secure (HTTPS) on the switch, use the feature
http-server command. To disable the HTTP or HTTPS server, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines In releases earlier than Cisco NX-OS Release 5.2(1)N1(1), HTTP and HTTPS are enabled on the switch
by default.
Examples This example shows how to enable the HTTP server on the switch and verify the status of the HTTP
server:
switch(config)# feature http-server
switch(config)# exit
switch# show feature
Feature Name
--------------------
assoc_mgr
cimserver
dhcp-snooping
fabric-binding
fc-port-security
fcoe
fcsp
fex
fport-channel-trunk
http-server
interface-vlan
lacp
ldap
lldp
niv
npiv
npv
otv
port_track
OL-27883-02
feature http-server
no feature http-server
Modification
This command was introduced.
Instance
--------
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
State
--------
enabled
disabled
disabled
disabled
disabled
enabled
disabled
enabled
disabled
enabled
enabled
enabled
disabled
enabled
disabled
disabled
disabled
disabled
disabled
Cisco Nexus 5500 Series NX-OS Security Command Reference
feature http-server
103