Ordering Information - ABB REF 610 Technical Reference Manual

1MRS755310
7.
Feeder Protection Relay
Technical Reference Manual

Ordering information

When ordering protection relays and/or accessories, specify the following:
Order number
*
HMI language set number
*
Quantity
*
The order number identifies the protection relay type and hardware as described in
the figures below and is labelled on the marking strip under the lower handle of the
relay.
Use the ordering key information in Fig. 7.-1 to generate the order number when
ordering complete protection relays.
REF610C55HCNP 01
Language set:
01 = (IEC) English, Svenska, Suomi
02 = (IEC) English, Deutsch, Francais, Italiano, Español, Polski
11 = (ANSI) English, Español, Portugese
Communication module:
P = plastic fiber
M = plastic fibre with input for arc protection
G = plastic and glass fiber
K = plastic and glass fibre with input for arc protection
R = RS-485
T = RS-485 with input for arc protection
D = RS-485 including DNP 3.0 protocol
E = RS-485 including DNP 3.0 protocol and input for arc protection
N = none
I/O extension module:
H = 3xSO and 3xDI (110/125/220/250 V DC)
L = 3xSO and 3xDI (24/48/60/110/125/220/250 V DC)
N = none
Power supply:
H = 100-240 V AC/110-250 V DC,
L = 24-60 V DC,
Earth-fault current input:
5 = 5A
1 = 1A
2 = 0.2A
Phase-current inputs:
5 = 5A
1 = 1A
Revision
Fig. 7.-1 Ordering key for complete relays
Use the ordering key information in Fig. 7.-2 to generate the order number when
ordering spare units.
2xDI (110/125/220/250 V DC),
3xPO
2xSO
2xDI (24/48/60/110/125/220/250 V DC),
3xPO,
2xSO
REF 610 REF 610
A040365_2
161