ABB REF 610 Technical Reference Manual page 105

1MRS755310
Table 5.1.16.3.-1 Supported function codes
Code Function
Transfer Function Codes
0 Confirm
1 Read
2 Write
Control Function Codes
3 Select
4 Operate
5 Direct operate
6 Direct operate NO ACK
Freeze Function Codes
7 Immediate Freeze
8 Immediate Freeze NO ACK
9 Freeze and Clear
10 Freeze and Clear NO ACK
11 Freeze with time
12 Freeze with time NO ACK
Application Control Function Codes
13 Cold Restart
14 Warm Restart
15 Initialize Data to Defaults
16 Initialize Application
17 Start Application
18 Stop Application
Configuration Function Codes
Feeder Protection Relay
Technical Reference Manual
Sends Multi-Fragment Responses
Description
Message fragment confirmation
No response
Request objects from outstation
Respond with requested objects
Store specified objects to outstation
Respond with status of operation
Select output point of outstation
Respond with status of control point
Set previously selected output
Respond with status of control point
Set output directly
Respond with status of control point
Set output directly
No response
Copy specified objects to freeze buffer
Respond with status of operation
Copy specified objects to freeze buffer
No response
Copy specified objects to freeze buffer and clear objects
Respond with status of operation
Copy specified objects to freeze buffer and clear objects
No response
Copy specified objects to freeze buffer at specified time
Respond with status of operation
Copy specified objects to freeze buffer at specified time
No response
Perform desired reset sequence
Respond with a time object
Perform desired partial reset operation
Respond with a time object
Initialize the specified data to default
Respond with status of operation
Set the specified application ready to be run
Respond with status of operation
Start the specified application to run
Respond with status of operation
Stop the specified application to run
Respond with status of operation
Other value: 999 (Counters 0...5) and 255
(Counters 10...21)
Point-by-point list attached
Yes No
REF 610 REF 610
Supported
Yes
Yes
Yes
No
No
No
No
Yes
Yes
a)
Yes
a)
Yes
No
No
Yes
Yes
No
No
Yes
Yes
105