Ordering Information - ABB REM 610 Technical Reference Manual

1MRS 752263-MUM
6.
Motor protection Relay
Technical Reference Manual

Ordering information

When ordering REM 610 protection relays and/or accessories, please specify the
following:
• Order number
• HMI language set number
• Quantity
The order number identifies the protection relay type and hardware as described in
the figures below and is labelled on the marking strip under the lower handle of the
relay.
Use the ordering key in Fig. 6.-1 to generate the order number when ordering
complete protection relays.
REM610B55HCMP XX
Language set:
Communication module: P = plastic fibre
RTD/Thermistor module: M= included
Power supply:
Earth-fault current input: 5 = 5A, 1=1A
Phase-current inputs:
Revision
Fig. 6.-1 Ordering key for complete relays
Use the ordering key in Fig. 6.-2 to generate the order number when ordering spare
units.
REM610B55HSNS XX
Language set:
RTD/Thermistor module: M= included
Power supply:
Earth-fault current input: 5 = 5A, 1=1A
Phase-current inputs:
Revision
Fig. 6.-2 Ordering key for spare units
HMI language set numbers, corresponding terminology and languages included, are
described in table 6.-1.
HMI language set number
G = plastic and glass fibre
R = RS-485
N = none
N = none
H = 100-240 V ac/110-250 V dc, 2xDI
(110/125/220/250 V dc), 3xPO, 2xSO
L = 24-60 V dc, 2xDI (24/48/60/110/125/220/250 V dc),
3xPO, 2xSO
5 = 5A, 1=1A
HMI language set number
N = none
H = 100-240 V ac/110-250 V dc, 2xDI
(110/125/220/250 V dc), 3xPO, 2xSO
L = 24-60 V dc, 2xDI (24/48/60/110/125/220/250 V dc),
3xPO, 2xSO
5 = 5A, 1=1A
REM 610
129