ABB REF 610 Technical Reference Manual page 104

REF 610 REF 610
104
Feeder Protection Relay
Technical Reference Manual
Always when sending multi-fragment responses (Slave devices only)
Configurable, with confirmation type selector
Timeouts while waiting for:
Data Link Confirm
Complete Appl. Fragment
Application Confirm
Complete Appl. Response
Sends/Executes Control Operations
WRITE Binary Outputs
SELECT/OPERATE
DIRECT OPERATE
DIRECT OPERATE - NO ACK
Count
Code
Trip/Close
Pulse On
Queue
Clear Queue
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY:
Reports Digital Input Change Events when no
specific variation requested
Never
Only time-tagged
Only non-time-tagged
Configurable to send both, one or the other
(depends on default variation)
Sends Unsolicited Responses
Never
Configurable
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE UNSOLICITED
Function codes supported
Default Counter Object/Variation
No Counters Reported
Configurable, default object and variation
Default Object 20
Default Variation 2
Point-by-point list attached
Configurable with primary data link layer
timeout, not relevant when NO ACK
No, multi-fragment application frames not
supported
Configurable with application layer timeout
No, not relevant in slave
Never
Never
Never
Never
Never
Never
Never
Never
Never
Never
Reports time-tagged Digital Input Change
Events when no specific variation requested
Never
Binary Input Change With Time
Binary Input Change With Relative Time
Configurable, depends on objects basic
variation (variation used at initialization)
Sends Static Data in Unsolicited Responses
Never
When Device Restarts
When Status Flags Change
No other options are permitted.
Counters Roll Over at
No Counters Reported
Configurable (attach explanation)
16 Bits (Counters 6...9)
32 Bits, but roll-over bits not used
1MRS755310