Changing Settings - GE L90 Instruction Manual

CHAPTER 4: INTERFACES
Default values are indicated in this instruction manual in mixed case. In the example shown here, the default access level is
Restricted.
Highest level
 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP
4.2.4.1 Example
 ACTUAL VALUES
 STATUS

 SETTINGS
 PRODUCT SETUP

 SECURITY


ACCESS LEVEL:
Restricted

 SECURITY


 DISPLAY
 PROPERTIES

LANGUAGE:
English

 SETTINGS
 SYSTEM SETUP

4.2.5 Changing settings

4.2.5.1 Entering numerical data
Each numerical setting has its own minimum, maximum, and increment value associated with it. These parameters define
what values are acceptable for a setting.
FLASH MESSAGE
TIME: 10.0 s

MINIMUM: 0.5
MAXIMUM: 10.0
L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
 SECURITY


Press the MENU key until the Actual Values header page appears. This page contains system
and relay status information.
Press the MENU key until the Settings header page appears. This category contains settings to
configure the relay.
Press the MESSAGE right arrow once to display the first sub-header (Security).
Press the MESSAGE right arrow once to display the first setting for Security.
Press the MESSAGE left arrow to return to the Security heading.
Press the MESSAGE down arrow to display the second setting sub-header associated with the
Product Setup header.
Press the MESSAGE right arrow once to display the first setting for Display Properties.
Press the MESSAGE left arrow to return to the Display Properties page, then again to return to
the Product Setup Page. Press the MESSAGE down arrow to move to the next Settings page. This
page contains settings for System Setup.
For example, select the SETTINGS  PRODUCT SETUP  DISPLAY PROPERTIES  FLASH
MESSAGE TIME setting.
Press the HELP key to view the minimum and maximum values. Press the key again to view the
next context sensitive help message.
FRONT PANEL INTERFACE
Lowest level (setting value)
ACCESS LEVEL:

Restricted
4
4-17