Table of Contents
Advertisement
Reference
Information
This section contains mounting information and instructions for updating firmware. Topics in
this section include the following:
•
•
Mounting
The XTP T USW 103 4K can be placed on a tabletop or mounted in a rack or underneath a
desk.
Tabletop Mounting
Attach the provided rubber feet to the bottom four corners of the enclosure.
Furniture Mounting
The Extron website (www.extron.com) contains a list of compatible furniture mounting kits.
To install the device to furniture, follow the mounting kit instructions.
Rack Mounting
The Extron website (www.extron.com) contains a list of compatible rack mounting kits. To
install the device to a rack, follow the mounting kit instructions and see the UL guidelines for
rack-mounted devices below.
UL guidelines for rack-mounted devices
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the
XTP T USW 103 4K in a rack.
1.
2.
3.
Mounting
Firmware Download
Elevated operating ambient temperature — If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature, Therefore, install the XTP T USW 103 4K in an
environment compatible with the maximum ambient temperature (Tma = +122 ˚F,
+50 ˚C) specified by Extron.
Reduced air flow — Install the equipment in a rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
Mechanical loading — Mount the equipment in the rack so that a hazardous
condition is not achieved due to uneven mechanical loading.
XTP T USW 103 4K Switcher • Reference Information
42
Advertisement
Table of Contents
