Table of Contents
Advertisement
Factory reset button
Factory Reset — Click the
6
settings except for firmware.
NOTE: This is the same as the
page 26).
Device Information panel
The
Device Information
Model — Displays the device model.
1
Firmware Version — Displays the full
2
firmware version.
Selected Input — Displays the input number
3
of the currently selected input.
Auto-input Switching — Displays the On or
4
Off status of auto switch mode.
Signal Present — Displays the signal
5
presence of all three inputs.
HDCP — Displays the HDCP status of
6
inputs 2 and 3.
Selected Audio Input — Displays the type of
7
the currently selected audio input.
Audio only — Displays the status of the
8
checkbox.
Allow Audio Only
Analog Audio Gain — Displays the analog
9
audio gain in dB.
XTP T USW 103 4K Switcher • XTP System Configuration Software
button to reset the switcher to factory
Factory Reset
E
SIS command (see
ZXXX
panel displays device information and settings.
Reset mode
on
39
Advertisement
Table of Contents
