Table of Contents
Advertisement
Device Settings
The
Device Settings
the switcher directly connected to the PC running the XTP software. Click the
Settings
Settings
Figure 24.
AV Controls panel
The
AV Controls
right does not have any active inputs.
Input selection — Click an
2
the summary within the panel changes to reflect the currently selected input.
NOTE: The signal indicators on the AV input buttons display green when a signal is
present on the corresponding input or gray when there is no signal present.
XTP and local out mute buttons — Press the type of mute button under the label for
3
an output to mute or unmute the output.
Video Mute buttons — mute or unmute the video only.
•
Audio Mute buttons — mute or unmute the audio only.
•
AV Mute buttons — mute or unmute both the video and audio.
•
NOTE: If video or audio is muted on the local HDMI or XTP output, and a new input
is selected, the video or audio remains muted.
screen allows a user to view and edit various device settings for
icon (see figure 24,
) on the
1
screen.
Device Settings Screen
panel, located on the left, is used to select an input. The image to the
Input
XTP T USW 103 4K Switcher • XTP System Configuration Software
Global Navigation Bar
button to select an input. As a new input is selected,
Device
to open the
Device
34
Advertisement
Table of Contents
