Extron electronics XTP T USW 103 4K User Manual page 45

Three input switcher with an integrated xtp transmitter

Table of Contents

Audio tab

Click the

tab (see figure 27,

Audio

output video mute options.

Figure 27.

Audio Tab

Input panel

The analog input gain fader has a gain range of -18 to +24 dB. Adjustments are applied in

1 dB increments. The default setting is 0 dB.

Input Audio Format — From the

inputs 2 and 3. They can be

Analog Audio Gain — Click and drag the handle of the

field, or click the

Down

Output panel

The switcher uses a black video signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal

so audio can be passed without video.

Allow Audio Only — Select the

to be output. When enabled, select the desired resolution and refresh rate from the

drop-down list to emulate in place of video.

Signal Type

XTP T USW 103 4K Switcher • XTP System Configuration Software

) to open the

screen. It contains input gain and

Audio

drop-down list, select the format for

Audio Format

, or

Auto

Digital

Analog

arrow to adjust the analog input gain.

checkbox to allow audio only

Allow Audio Only

slider, enter a value in the

Gain

Table of Contents