Input/Output tab
Click the
tab (see figure 25,
Input/Output
contains input information and HDCP authorization options.
Figure 25.
Input/Output Tab
Input Name— Displays the input name.
2
Signal Type — Displays the signal type of each input. Input 1 is
3
and input 3 is
HDMI/DVI,
HDCP Authorized — Select either
4
the HDCP Authorized feature for the associated input. This feature determines if a digital
input reports as an HDCP authorized sink to a source.
NOTE: HDCP authorization applies only to inputs 2 and 3.
For source devices that require encryption, enable the HDCP Authorized feature.
•
If HDCP Authorized is disabled for sources that require encryption (for example, a
Blu-ray Disc™ player), the output is muted.
For source devices that encrypt their output even if the source material does not
•
require HDCP encryption, disable the HDCP Authorized feature to view the content
on non-HDCP compliant displays.
XTP T USW 103 4K Switcher • XTP System Configuration Software
) to open the
1
.
DisplayPort
HDCP Authorized
screen. It
Input/Output
, input 2 is
analog
checkbox to enable or disable
35