Table of Contents
Advertisement
Add an EDID File to the EDID Library
1.
In the
Available EDID
on the previous page). The
8
2.
Navigate to and select the desired EDID file and click
panel (see
Available EDID
3.
Assign the EDID file from the
Save output EDID
1.
On the
screen, right-click on the desired EDID setting in the
EDID Minder
panel (see
figure
Outputs
2.
Select the
Save EDID to Library
PC. Alternatively, right-click on the desired EDID, select
into the
or
Favorites
Set favorite EDID
To add commonly used EDID settings to the
one of the following methods:
Click and drag the desired EDID from the
•
panel to the
Favorites
figure
29,
).
2
Right-click the desired EDID and select
•
panel.
Favorites
EDID filters
The filters (see figure 30) can be used to easily locate a specific EDID setting.
Resolution filter
1
Refresh Rate filter
2
Video Format filter
3
Figure 30.
EDID Minder Filters
To use a filter or combination of filters, perform the following:
1.
Select an EDID setting from one of the drop-down lists of the associated filter (see
figure 30,
-
). The available EDID options that match the filter selection are
1
4
displayed in their respective panels.
2.
Repeat step 1 to apply more filters.
NOTE: To clear the currently applied filters, click the
figure 30,
). All filters are reset.
5
Common timings
This function automatically displays available EDID settings that are common among
multiple selected outputs.
1.
Hold
and click the desired outputs in the
<Ctrl>
tab (located to the right of the
Common Timings
listing the EDID settings common among the selected outputs.
2.
Select the desired common EDID. The EDID is shown in the
XTP T USW 103 4K Switcher • XTP System Configuration Software
panel, click the
Add EDID to Library
window opens.
Browse
).
4
panel to import the EDID to the device.
Available EDID
29,
).
3
option. The EDID setting is saved to the connected
panel.
Available EDID
Favorites
Connected Outputs
panel. The EDID setting is copied to the
. Then,
Copy
Audio Format filter
4
Clear button
5
Connected Outputs
Connected Outputs
button (see
figure
. The EDID file appears in the
Open
Connected
, and then
Copy
Paste
panel for quick access, perform
or the
Available EDID
panel (see
Favorites
the EDID setting into the
Paste
button next to the filters (see
Clear
panel. The
panel) appears,
Available EDID
29,
the EDID
panel.
41
Advertisement
Table of Contents
