Service Support; Product Recycling/Disposal - Emerson Rosemount 3051S Reference Manual

Rosemount 3051S ERS System
Figure 1-1. ERS Models and
Possible Configurations
3051SAM Inline
(Secondary)
3051SAL Coplanar with FF Seal
(Primary)

SERVICE SUPPORT

PRODUCT
RECYCLING/DISPOSAL
1-2
Rosemount 300ERS Housing Kit
• Upgrade and convert an existing 3051S transmitter into a 3051S ERS
sensor.
• Easily order replacement housings and electronics for an existing ERS
system.
3051SAM Inline
(Primary)
3051SAL Coplanar with FF Seal
(Secondary)
To expedite the return process outside of the United States, contact the
nearest Rosemount representative.
Within the United States, call the Emerson Process Management Instrument
and Valves Response Center using the 1-800-654-RSMT (7768) toll-free
number. This center, available 24 hours a day, will assist you with any needed
information or materials.
The center will ask for product model and serial numbers, and will provide a
Return Material Authorization (RMA) number. The center will also ask for the
process material to which the product was last exposed.
Individuals who handle products exposed to a hazardous substance can avoid injury if they
are informed of and understand the hazard. If the product being returned was exposed to a
hazardous substance as defined by OSHA, a copy of the required Material Safety Data Sheet
(MSDS) for each hazardous substance identified must be included with the returned goods.
Emerson Process Management Instrument and Valves Response Center
representatives will explain the additional information and procedures
necessary to return goods exposed to hazardous substances.
Recycling of equipment and packaging should be taken into consideration
and disposed of in accordance with local and national legislation/regulations.
Reference Manual
00809-0100-4804, Rev AA
January 2011
3051SAM Inline
(Secondary)
3051SAL Coplanar with FF Seal
and Remote Display (Primary)