Reference Manual
00809-0100-4804, Rev AA
January 2011
Section 1
USING THIS MANUAL
MODELS COVERED
Rosemount 3051S ERS System
Introduction
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Models Covered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
Product Recycling/Disposal . . . . . . . . . . . . . . . . . . . . . . . page 1-2
The sections in this manual provide information on installing, operating, and
maintaining a Rosemount 3051S ERS
sections are organized as follows:
•
Section 2: Installation contains mechanical and electrical installation
instructions, and field upgrade options.
•
Section 3: Configuration provides instruction on commissioning and
operating a 3051S ERS System. Information on software functions,
configuration parameters, and online variables is also included.
•
Section 4: Operation and Maintenance contains operation and
maintenance techniques.
•
Section 5: Troubleshooting provides troubleshooting techniques for the
most common operating problems.
•
Appendix A: Specifications and Reference Data supplies reference and
specification data as well as ordering information.
•
Product Certifications contains approval information, European ATEX
directive information, and approval drawings.
The 3051S ERS System is a flexible, 2-wire HART architecture that calculates
differential pressure (DP) electronically, using two pressure sensors. The
pressure sensors are linked together with an electrical cable and
synchronized to create a single 3051S ERS system. The sensors used in the
3051S ERS System can consist of any combination of 3051SAM and
3051SAL models. One of the sensors is required to be a "Primary" and the
other is required to be a "Secondary."
The Primary sensor contains the 4-20 mA loop termination and optional LCD.
The Secondary sensor is made up of a pressure sensor module and junction
box housing that is connected to the Primary sensor, using a standard
instrument cable.
Rosemount 3051SAM ERS Sensor
•
Coplanar and In-Line sensor module platforms
•
Variety of process connections including NPT, flanges, manifolds, and
1199 remote diaphragm seals
Rosemount 3051SAL ERS Sensor – Liquid Level Configuration
•
Integrated transmitter and remote diaphragm seal in a single model
number
•
Variety of process connections including flanged, threaded, and
hygienic remote diaphragm seals
™
®
System with HART
protocol. The
1-1