Measurement Quality Status; Service Support - Emerson Rosemount 3051S ERS Reference Manual

Reference Manual
00809-0100-4804, Rev CB
5.3

Measurement quality status

The Rosemount ERS System is compliant with the HART Revision 6 Standard. One of the most noticeable
enhancements available with the HART Revision 6 standard is that each variable has a measurement
quality status. These statuses can be viewed in AMS Device Manager, with a Field Communicator, or with
any HART Revision 6 compatible host system.
Figure 5-1. Measurement Quality Status
A. Quality status on DP measurement status
Possible measurement quality statuses
Good: Displayed during normal device operation.

Poor: Indicates the accuracy of the measured variable has been compromised. For example, the P-Hi

Module Temperature has failed and is no longer compensating the P-Hi Pressure measurement.
Bad: Indicates the variable has failed. For example, the P-Hi Pressure sensor has failed.

5.4

Service support

To expedite the return process outside of the United States, contact the nearest Rosemount
representative.
Within the United States, call the Emerson Instrument and Valves Response Center using the
1-800-654-RSMT (7768) toll-free number. This center, available 24 hours a day, will assist you with any
needed information or materials.
The center will ask for product model and serial numbers, and will provide a Return Material
Authorization (RMA) number. The center will also ask for the process material to which the product was
last exposed.
Troubleshooting
A
Troubleshooting
November 2016
59