Table of Contents
Advertisement
Maintenance Menu Settings
The Maintenance menu lets you run nozzle checks, cleaning cycles, and other maintenance operations.
You can access the menu directly by pressing the
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting
Nozzle Check
Cleaning
Head Maintenance
Replace Ink Bottle
Head Cleaning Set
Other Maintenance
Parent topic:
Options
Print At Right
Print At Center
Print At Left
Cleaning (Light)
Cleaning (Heavy)
Preventive Cleaning
Auto Head Maintenance
Regular Cleaning
—
—
Grease Carriage Rod
Using the Control Panel Menus
maintenance button.
Description
Prints a nozzle check pattern in the
specified location on the media.
Lets you clean all or selected nozzles,
based on the nozzle check pattern.
Select the light cleaning level first. If
nozzles are still clogged, select the
heavy cleaning level.
If you anticipate automatic or periodic
head cleaning will occur during a print
job, select Preventive Cleaning to
avoid the cleaning and continue the
print job.
Select Execute if nozzles are still
clogged after head cleaning.
Select Move Head to position the print
heads for cleaning.
View instructions on how to replace the
waste ink bottle on the LCD screen.
View information about the head
cleaning set on the LCD screen.
Select Yes if a message to apply
carriage rod grease appears on the
LCD screen.
83
Advertisement
Table of Contents
