Table of Contents
Advertisement
Setting
Sleep Mode
Charge Setting
Cleaning During Standby
Head Maint. Interval
Restore Settings
Parent topic:
Related references
Printable Area and Media Size Checking
Related tasks
Cleaning the Print Head
Checking for Clogged Print Head Nozzles
Maintenance Menu Settings
The Maintenance menu lets you run nozzle checks, cleaning cycles, and other maintenance operations.
You can access the menu directly by pressing the
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Options
15 to 240 minutes
Extend Charge Timing
Forced Charge
When to Clean
Cleaning Level
20 to 400 m
Yes
No
Using the Control Panel Menus
Description
Sets the number of minutes of inactivity
before the product enters sleep mode.
Press any button on the control panel
to resume operation.
Adjusts the chip unit if there is a
discrepancy between the estimated ink
level indicator on the LCD screen and
the actual amount of remaining ink.
Sets the time (1 to 240 hours) to
perform head cleaning and the strength
level of cleaning when the product has
not been in use.
Sets when to perform head
maintenance after the selected length
of media has been printed.
Returns all items in the Printer Setup
menu to their default settings.
maintenance button.
87
Advertisement
Table of Contents
