Epson SureColor F9370 User Manual page 16

4 Media information
Displays, from left to right, the selected media (0 indicates RIP settings are in use), platen gap,
media width, and remaining media.
: platen gap is 1.6
: platen gap is 2.0
: platen gap is 2.5
: width of loaded media
: remaining length of loaded media (increments of 3.9 in [0.1 m])
: remaining length of loaded media (increments of 39.4 in [1 m])
5 Chip unit status (see the next table)
6 Waste ink bottle status
The waste ink bottle status indicates the waste ink level and changes from normal (left) to
warning or error status (right) if necessary.
: Waste ink bottle is almost full; prepare a new waste ink bottle
: Waste ink bottle is full; replace the waste ink bottle
7 Head cleaning set status
: The level on the icon goes down as replacement time approaches
8 Cleaning notification
Displays the time or remaining media length before an automatic or periodic cleaning occurs
16