Table of Contents
Advertisement
16. Fully submerge the tip of a cleaning stick into the grease, rotate the stick two or three times, and
remove it from the grease. Then apply the grease to pad B.
17. Hold pad B against the front of carriage rod B and smoothly slide it back and forth twice across the
carriage rod to grease the rod, as shown in step 15.
18. Close the front cover and press the OK button.
The carriage moves back and forth.
19. Remove the used pad A from the grease tool, and dispose of pad A and pad B properly. Close the
grease container and store it out of direct sunlight and at room temperature along with the grease
tool and other supplies.
Parent topic:
Maintenance
Related references
Maintenance Precautions
Consumables and Replacement Parts
145
Advertisement
Table of Contents
