6. Unlock the two casters.
Caution: Roll the product on the casters for only a short distance over a level floor. Do not transport
the product using the casters.
Parent topic:
Related tasks
Cutting Media
Replacing the Waste Ink Bottle
Setting Up the Product After Moving
Follow these steps to set up the product after moving it.
1. Verify that the location is suitable for installation.
2. Perform parallel adjustment for the media feeding unit and auto take-up reel as necessary.
3. Install the waste ink bottle.
4. Connect the power cable to an electrical outlet and turn on the printer.
5. Load media in the product.
6. Adjust the media feed from the Customize Settings menu.
Parent topic:
Moving or Transporting the Product
Moving or Transporting the Product
148