Table of Contents
Advertisement
LCD screen message
Solution
Roll Type Error
Make sure the Roll Type setting is correct for the loaded media. Follow the
on-screen instructions to clear the error.
Release and then reset
the media loading lever,
then match Roll Type
setting to actual media.
Refer to manual and
You have not peformed regular cleaning for one month. If you do not clean
perform regular
the print head, nozzle clogs or print head damage may occur.
cleaning.
Maintenance Request
The indicated product part is nearing or at the end of its service life. Contact
Epson for support and provide them with the service code shown on the LCD
Replace Part
screen.
Now/Replace Part Soon
You must replace the part before printing again. If you continue to print, a call
XXXXXXXXXX
for service occurs.
Call For Service
A call for service occurs when:
XXX Error XXX
• The power cable is not connected securely
Power off and then on. If
• An error occurs that cannot be cleared
this doesn't work, note
When a call for service has occurred, the printer automatically stops printing.
the code and call for
Turn off the printer, disconnect the power cable from both the outlet and the
service.
printer, and then reconnect them. Turn the printer on and off several times. If
the same call for service is displayed on the LCD screen, contact Epson for
support and provide them with the service code shown on the LCD screen.
Parent topic:
Solving Problems
Related references
Where to Get Help
Environmental Specifications
Media Setup Menu Settings
Printer Setup Menu Settings
Related tasks
Replacing the Waste Ink Bottle
Replacing the Chip Unit and Refilling Ink
Cleaning the Print Head
153
Advertisement
Table of Contents
