Table of Contents
Advertisement
Setting
Head Mode
Sleep Mode
Charge Settings
Cleaning During Standby
Head Maint. Interval
Restore Settings
Parent topic:
Using the Control Panel Menus
Related references
Printable Area and Media Size Checking
Related tasks
Cleaning the Print Head
Checking for Clogged Print Head Nozzles
Options
2 Heads Mode
Head1
Head2
15 to 240 minutes
Extend Charge Timing
Forced Charge
When to Clean
Cleaning Level
20 to 400 m
Yes
No
82
Description
Select 2 Heads Mode in most
situations.
If there is a clogged nozzle in a single
print head that cannot be cleared after
several head cleanings, you can
continue printing by selecting one of
the unclogged heads.
Sets the number of minutes of inactivity
before the product enters sleep mode.
Press any button on the control panel
to resume operation.
Adjusts the chip unit if there is a
discrepancy between the estimated ink
level indicator on the LCD screen and
the actual amount of remaining ink.
Sets the time (1 to 240 hours) to
perform head cleaning and the strength
level of cleaning when the product has
not been in use.
Sets when to perform head
maintenance after the selected length
of media has been printed.
Returns all items in the Printer Setup
menu to their default settings.
Advertisement
Table of Contents
