Replacing The Head Cleaning Set - Epson SureColor F9370 User Manual

Table of Contents

Advertisement

5. Lower the stopper onto the waste ink bottle and make sure it firmly seals to the mouth of the bottle.
Caution: If the ink splash guard does not firmly seal, waste ink could spill onto your product.
6. Press the OK button on the product control panel.
7. Press the OK button again to reset the waste ink counter.
Note: If you replaced the waste ink bottle before the replacement message appeared on the control
panel, press the
counter.
Parent topic:
Related references
Maintenance Precautions
Consumables and Replacement Parts

Replacing the Head Cleaning Set

If you notice any of the following, you need to replace the head cleaning set:
• Your printouts are faint or smudged.
maintenance button and select Waste Ink Counter to clear the waste ink
Maintenance
130

Advertisement

Table of Contents
loading

Table of Contents