Maintenance Menu Settings
The Maintenance menu lets you run nozzle checks, cleaning cycles, and other maintenance operations.
You can access the menu directly by pressing the
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting
Nozzle Check
Cleaning
All Nozzles
Head1/Head2
Head1
Head2
Selected Nozzles
Head Maintenance
Waste Ink Counter
Parent topic:
Related tasks
Checking for Clogged Print Head Nozzles
Cleaning the Print Head
Replacing the Waste Ink Bottle
Printer Status Menu Settings
The Printer Status menu lets you track printer usage and firmware.
Options
Print At Right
Print At Center
Print At Left
Execute (Light)
Execute (Medium)
Execute (Heavy)
Move Head
—
Using the Control Panel Menus
maintenance button.
Description
Prints a nozzle check pattern in the
specified location on the media.
Lets you clean all or selected nozzles,
based on the nozzle check pattern.
Select the lightest cleaning level first. If
nozzles are still clogged, select a
heavier cleaning.
Positions the print heads for cleaning.
Lets you reset the waste ink counter if
you replace the waste ink bottle before
being prompted by a message on the
control panel.
85