Table of Contents
Advertisement
Media Handling
See these sections to load and handle media on your product.
Media Handling Precautions
Loading Media
Viewing and Changing Media Settings
Saving Sets of Media Settings
Printable Area and Media Size Checking
Printing the Amount of Media Remaining
Aligning the Print Head
Media Feed Adjustment
Adjusting Heating and Drying During Printing
Cutting Media
Using the Auto Take-up Reel
Media Handling Precautions
Follow these guidelines as you load media in your product and remove printed media.
• Be careful when you touch the after heater and media edge guides; they may be hot and could burn
you.
• Take care not to trap your fingers when opening and closing the front cover.
• Do not rub your hands along the edges of the media; the sharp edges could cut you.
• Media is very heavy, so use at least two people to carry the rolls.
• Load media just before printing on it to avoid creases from the pressure rollers; creases may cause
jams or cause the media to rub against the print head.
23
Advertisement
Table of Contents
