Printable Area and Media Size Checking
The left and right edges of media recognized by your product vary depending on the Media Size Check
setting.
• When the Media Size Check setting is turned on, your product automatically detects the left and right
edges of the media within 0.2 inches (5 mm), as long as the media edge guides are attached correctly.
1
• When the Media Size Check setting is turned off, your product uses the longest scale on the after
heater label shown as the standard position for the right edge of the media. The left edge of the media
is determined to be 64 inches (1626 mm) from the standard position for the right edge, no matter the
width of the loaded media. The printable area ranges for the media are described in the table here.
0.2 inches (5 mm)
42