5. Lower the stopper onto the waste ink bottle and make sure it firmly seals to the mouth of the bottle.
Caution: If the ink splash guard does not firmly seal, waste ink could spill onto your product.
6. Press the OK button on the product control panel.
7. Press the OK button again to reset the waste ink counter.
Note: If you replaced the waste ink bottle before the replacement message appeared on the control
panel, press the
counter.
Parent topic:
Related references
Maintenance Precautions
Consumables and Replacement Parts
Replacing the Head Cleaning Set
If you notice any of the following, you need to replace the head cleaning set:
• Your printouts are faint or smudged.
maintenance button and select Replace Ink Bottle to clear the waste ink
Maintenance
135