Replacing The Head Cleaning Set; Preparing And Replacement Timing - Epson SC-F2100 Operator's Manual

SC-F2100 Series Operator's Guide
E
Press the Z button.
F
Check again to confirm that a new Waste Ink
Bottle is correctly placed. Press the Z button to
clear the waste ink counter.
Dispose of the waste ink with the waste ink bottle. Do
not pour it into another container.
c
Important:
Note the following points when transferring waste
ink from the waste ink bottle to another container.
❏ Use a container made of PE (polyethylene)
when transferring the waste ink.
❏ Attach the spout included with the printer to
the rim of the waste ink bottle and transfer the
waste ink.
❏ Pour the waste ink carefully. Pouring the waste
ink quickly may cause it to spill and splatter.
❏ Store the waste ink by securely closing the lid of
the container to which you transferred it.
Disposing of used waste ink and Waste Ink Bottles U
"Disposal" on page 33
Maintenance
Replacing the Head
Cleaning Set
Preparing and Replacement
Timing
When Head cleaning set is nearing end of life. is
displayed
Prepare a new head cleaning set as soon as possible.
When you want to replace the parts at this stage,
implement Head Cleaning Set from the setup menu,
and then replace the parts. If you replace them without
implementing Head Cleaning Set, the head cleaning set
counter will not operate correctly.
Details on the setup menu U User's Guide (Online
Manual)
c
Important:
About the Head Cleaning Set Counter
The printer tracks amounts consumed using the
head cleaning set counter and displays a message
when the counter reaches the warning level.
If you replace parts when the message " Head
Cleaning Set Life" is displayed, the counter is
cleared automatically.
If you need to replace the parts before the message is
displayed, implement Head Cleaning Set from the
setup menu.
Details on the setup menu U User's Guide (Online
Manual)
When Head Cleaning Set Life is displayed
See the following page, and replace all the parts included
in the head cleaning set. Printing cannot be performed if
the parts are not replaced.
The head cleaning sets contains the following parts.
❏ Wiper unit (x1)
❏ Anti-drying cap (x1)
46