Table of Contents
Advertisement
OMGEM5KN4.7.1
Changing the selected ID
It is possible to change the currently selected ID (identified by green icon
2 and 8 and keys to move the cursor up and down the list of visible Ids. To change the
selection press Enter. Notice that the selected ID moves to the top of the list and its icon
turns green.
Changing the scale
You can change the display's scale by using the 4 and 6 keys to zoom in and out.
GPS signal strength:
7) Select soft-key 'Continue' and the operator is returned to the 'Main Gas Read Screen'.
Page 54 of 70
This icon shows the signal strength the analyzer's GPS module is able
to provide. Full, okay and fair strength respectively.
GPS failure - the GPS was unable to get a line of sight lock on enough
satellites. Or, it may be that it hasn't had time to get a lock.
GEM5000 Gas Analyzer
) by pressing the
Advertisement
Table of Contents
