Table of Contents
Advertisement
GEM5000 Gas Analyzer
7.3.3 Device information
This option displays default instrument information and settings such as
serial number, service due date, last zero calibration date and last span
calibration date.
1)
Select the 'Menu' key on the front of the analyser to display the 'Device Settings'
menu.
2)
Select 'Key 3 – Device Information' and the following screen is displayed:
3)
The information displayed on this screen is informational only and cannot be edited
by the operator. The operator may be asked serial number, service due date and
version number information when contacting QED.
Note:
4)
Select soft-key 'Exit' to exit the screen and return to the 'Device Settings' menu.
7.3.4 Diagnostics
This option enables the Technical Support Team to identify and resolve issues
with the instrument and settings. If required, the operator may be asked to
confirm the diagnostics displayed.
1)
Select the 'Menu' key on the front of the analyser to display the 'Device Settings'
menu.
2)
Select 'Key 4 – Diagnostics' and the following screen is displayed:
The communications setting 'Legacy' mode is for use with GAM >=v1.5.
GA5K mode is reserved for future applications – use with 5000 series
updater tool
OMGEM5KN4.7.1
Page 29 of 70
Advertisement
Table of Contents
