Table of Contents
Advertisement
OMGEM5KN4.7.1
4)
The operator may also change the default time zone. Selecting the 'Key 4 Scroll-
left' or 'Key 6 – Scroll right' to move through the different time zones. Press the
'Enter' key to confirm your default setting.
5)
Select 'Key 3' to toggle between 'Manual Update' and 'Automatic Update' in order to
choose how the date and time is set if updating from satellite signal.
Manual
Automatic
6)
Select the soft-key 'Exit' to exit and return to the 'Device Settings' menu.
7.3.2 Bluetooth
This option enables the operator to set and utilize Bluetooth technology.
This may be useful when downloading gas readings from the analyzer to
the PC instead of connecting the analyzer to a PC via a USB cable.
Bluetooth may also be used to transfer Site IDs to other 5000 series gas
analyzers if required.
1)
Select the 'Menu' key on the front of the analyzer to display the 'Device Settings'
menu.
2)
Select 'Key 2 – Bluetooth' and the following screen is displayed:
3)
Enter the 'Pairing PIN' value when prompted by your computer for the device's
pairing code.
4)
Select soft-key 'Exit' to exit the screen and return to the 'Device Settings' menu.
Page 28 of 70
Used to manually obtain and update the date and time from the
satellite signal when requested. Select soft-key 'Set now' to set
date and time from satellite when available.
Used to automatically update the date and time received from the
satellite signal when available. This option is only available when
the GPS option is fitted to the analyser at the time of
manufacture.
GEM5000 Gas Analyzer
Advertisement
Table of Contents
